1. First lay the base plate on a flat surface.
2. Take the bottom column (with the thumbscrews attached) and insert it into the slots as shown.
3. Tighten the thumbscrews to secure to the base plate.
4. Insert the top portion of the pedestal into the bottom portion.
5. OPTIONAL - If you have a printer shelf, this is where you will attach the printer shelf. Locate the triangle pieces and attach as shown in the image. If you DO NOT have a printer shelf, go to step 6.
Insert the cross members
6. Use the thumb screws to secure the middle portion and/or the printer shelf.
7. Locate the top unit (camera) and insert it into the top of the pedestal on both sides.
8. Use the thumbscrews to secure the top unit to the pedestal on both sides.
Video link: